| PRODUCT | PRICE |
|---|---|
| 24' Free Standing Panel - Unwelded Rod | $545 |
| 24' Free Standing Panels | $595 |
| 30' Free Standing Panels | $695 |
| 24' Free Standing Buffalo Panels - 6'6" tall | $675 |
| 25' Free Standing Wind Break Panels | $995 |
| 12' Sucker Rod Panel | $195 |
| 24' Sucker Rod Panel | $395 |
| Calf Shelter | $2895 |
| 24' Feeder. Panel - Slant Bar | $750 |
| 24' Feeder Panel - Adjustable Bar | $875 |
| 7' x 7' Single Bale Feeder with Sheeting | $1150 |
| 7' x 14' Double Bale Feeder with Sheeting | $1695 |
| 5' x 10' Double Bale Feeder with Sheeting | $1395 |
| Double Sorting Gate | $895 |
| Triple Sorting Gate | $1250 |
| Slide Gate | $595 |
| 12' Adjustable Single Alley with Stops | $2395 |
| 17' Adjustable Double Alley with Stops | $4195 |
| 24' Adjustable Single Alley with Stops | $3295 |
| 30' Adjustable Single Alley with Stops | $3595 |
| 29' Adjustable Double Alley with Stops | $5595 |
| 20' Bottomless Bunk with 10 Gauge Sheeting | $1695 |
| 20' Bottomless Fenceline Feeder with 10 Gauge Sheeting | $2095 |
| 26' Bottomless Bunk with 10 Gauge Sheeting | $1995 |
| 20' V-Bottom Bunk with 10 Gauge Sheeting | $2495 |
| 20' V-Bottom Fenceline Feeder with 10 Gauge Sheeting | $2895 |
| 4' Gate | $195 |
| 6' Gate | $235 |
| 8' Gate | $295 |
| 10' Gate | $335 |
| 12' Gate | $375 |
| 14' Gate | $405 |
| 16' Gate | $475 |
| Gate HInge | $45 |
| 12' Buffalo Gate | $525 |
~ Made with 2 7/8" Oil Well Pipe & Sucker Rod
~ Sucker Rod is run through holes that are cut into the pipe then we weld the sucker rod.
~ Panel is 24'3" long & 5'8" High
~ Panels come with 2 chains & key hole slots to quickly tie panels together
~ Panel weighs 850lbs
~ Panels set up quickly to make corral fast
~ No posts needed
~ Leg has a 2" rise in the center to help prevent panel movement from pushing cattle
~ Optional Gates can be added to Panel
~ Made with 2 7/8" Oil Well Pipe & Sucker Rod
~ Holes are cut into pipe for Sucker Rod then Welded
~ Panel is 30' long & 5'8" High
~ Panels come with 2 chains & key hole slots to quickly tie panels together
~ Panel weighs 1000lbs
~ Panels set up quickly to make corral fast
~ No posts needed
~ Leg has a 2" rise in the center to help prevent panel movement from pushing cattle
~ Optional Gates can be added to Panel
~ Made with 2 7/8" Oil Well Pipe, 1" x 2" square tubing, & 22 gauge galvanized formed sheeting
~ Panel is 25'1" long & 7'6" High
~ Panels come with 2 chains & key hole slots to quickly tie panels together
~ Panel weighs 850lbs
~ Panels set up quickly to make corral fast
~ No posts needed
~ 10' Wide Legs are removable and have a 2" rise in the center to help prevent panel movement from pushing cattle
~ Optional Gates can be added to Panel
Our Calf Shelters were designed to take care of your important furry commodities. The roof and sides fold up when not in use.
We do not make the shelter too deep so mommas can keep close to her babies.
Belting lines the bottom of the shelter to insure a tight fit to the ground.
Proven 14 year old design.
~ Made with 2 7/8" Pipe Frame, 1" x 2" 14 gauge tubing, & 22 gauge Super Steel
~ The Calf Shelter is built onto the back side of our 25' Wind Break Panel.
~ Calf Shelter is 42" Deep
~ Roof is just under 23' Long
~ Panels come with 2 chains & key hole slots to quickly tie panels together
~ Calf Shelter weighs 1200lbs
~ Calf Shelter sets up quickly
~ No posts needed
~ 10' Wide Removable Legs
~ Leg has a 2" rise in the center to help prevent panel movement from pushing cattle
Our 24' Adjustable Single Working Alley will make working cattle much easier! It features an adjustable side, and back stops. Built using 2 7/8" Oil Well Pipe and 1" Sucker Rod. It is made for heavy use!
We sell an optional slide gate that attaches to the front or back of the Alley.
~ Made with 2 7/8" Oil Well Pipe & 1"Sucker Rod
~ Holes are cut into the pipe, the sucker rod is run through the pipe then welded
~ Measures 24' Long & 7' Tall
~ Easily adjusts
~ Alley offers 3 position adjustments
~ Inner width adjustments - 18", 24", & 30"
~ Comes with 2 back stops so cattle can't back up
~ Belting is used to close gap when adjusted down
~ Optional slide gate is available that attaches to either the front or back of the Alley.
Double J swing gates are made in-house from 1 ½" square tubing and feature a unique double gate hinge system that allows the gate to swing nearly 360 degrees around the panel. This allows the gate to lay flat on either side of the panel.
Gates are a great addition to the Free Standing Corral Panels!
The following gate sizes are available:
4' 6' 8' 10' 12' 14' 16'
Custom sizes can also be ordered!
~ Made with 2 7/8" Oil Well Pipe & Heavy gauge sheeting